Table of Contents
Advertisement
Chapter 2 Preparations
1.2
Overview of Installation and Removal
Install/remove components by using the following procedure.
1.
Turn the server off.
See Chapter 3 (6. Turning off the Server).
2.
Disconnect all the power cables connected to the server from the outlet, and then disconnect them
from the server.
3.
Disconnect all cables connected to the connector at the rear.
4.
Remove the side cover.
See Chapter 2 (1.3. Removing the Side Cover).
5.
Remove the front bezel if applicable.
See Chapter 2 (1.4 Removing the Front Bezel).
6.
Depending on the components to be installed or removed, follow the procedure in order.
See Chapter 2 (1.5 TPM Kit to 1.15 VMware ESXi Base kit (N8106-018)).
7.
Connect cables
See Chapter 2 (1.16 Connecting Cables).
8.
Attach the front bezel.
See Chapter 2 (1.17 Attaching the Front Bezel).
9.
Attach the side cover.
See Chapter 2 (1.18 Installing the Side Cover).
Continue the setup while referring to Chapter 2 (2.2 Connection).
34
Express5800/T110j User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
