Jog Operation Using A Digital Operator - YASKAWA SGLGW User Manual

5.6.2

JOG Operation Using a Digital Operator

This section describes the procedure for executing a JOG operation using a digital
operator.
Connect the digital operator to the SERVOPACK CN3 connector.
The digital operator can be connected or removed while the SERVOPACK power is
ON.
The operation procedure is explained with the parameter Pn000.0 set to 0 (linear
scale counting up direction as the forward direction).
Step Display after operation
1
B B
F n 0 0 0 : A l m H i s t o r y
2
F n 0 0 2 : J O G
F n 0 0 3 : Z − S e a r c h
F n 0 0 4 : P r o g r a m J O G
www.dadehpardazan.ir 88594014-15
JUSP-OP05A-1-E
Digital Operator
SGDV
SERVOPACK
Digital operator conversion conneotor
Model: JZSP-CVS05-A3-E
Insert securely into
SERVOPACK CN3 connector.
− F U N C T I O N −
Σ-V series Σ-III series
JUSP-OP05A
Digital Operator
Keys
Turn ON the power to the SERVO-
PACK.
The initial window will appear, and
then the parameter/monitor mode will
appear.
Press the
menu of the Utility Function. Press the
or
5.6 JOG Operation
Operation
Key to view the main
Key to select Fn002.
5
5-29