YASKAWA SGLGW User Manual page 157

5 Trial Operation (Checking Linear Servomotor Operation)
5.5.2 When Using an Absolute Linear Scale
 Using the Panel Operator
Step Display after operation
1
2
3
4
5
6
7
Turn OFF the power to the SERVOPACk and then ON again to enable the setting.
5-20
Keys
MODE/SET
MODE/SET
MODE/SET
MODE/SET
MODE/SET
www.dadehpardazan.ir 88594014-15
Press the MODE/SET Key to select the Utility
Function mode.
DATA/
Press the UP or DOWN Key to select Fn080.
DATA/
Press the DATA/SHIFT Key for
approximately one second. The display shown
on the left will appear.
DATA/
Press the MODE/SET Key to start the polarity
detection.
DATA/
When the polarity detection is complete, the
display shown on the left will appear.
The linear servomotor will be in servo OFF
status.
Press the DATA/SHIFT for approximately one
second. The display will return to Fn080.
DATA/
Operation