YASKAWA SGLGW User Manual page 104

(3) SGDV-DE5A
Power supply
Three-phase 400 VAC
R S T
Molded-case
circuit breaker
(MCCB)
Protects the power
supply line by shutting
the circuit OFF when
overcurrent is
detected.
Noise filter
Used to eliminate
external noise from
the power line.
Magnetic
contactor
Turns the servo
ON and OFF.
Install a surge
absorber.
24VDC
*1
power supply*
Regenerative
2
resistor*
Linear servomotor
main circuit cable

Use a 24-VDC power supply with double insulation or reinforced insulation. (The power
supply is not included)

Before connecting an external regenerative resistor to the SERVOPACK, refer to 3.4 Con-
necting Regenerative Resistors.

For connection to the command option module, refer to the user's manual of the corre-
sponding option module.
www.dadehpardazan.ir 88594014-15
SGDV- DE5A
SERVOPACK
1
Cable for connecting a
linear scale
Linear scale
(Not included)
3.2 System Configuration Diagram
Option module* 3
Connection cable
for digital operator
Connection cable
for personal computer
I/O signal cable
External LED indicator,
external device, etc.
When not using the safety function,
use the SERVOPACK with the safety
function jumper connector
(JZSP-CVH05-E, provided as an
accessory) inserted.
When using the safety function,
insert a connection cable
specifically for the safety function.
Cable for connecting a
serial converter unit
Serial converter unit
Cable for connecting a
hall sensor
Linear servomotor
with core
Digital
operator
Personal
computer
Safety function
devices
3
3-19