YASKAWA SGLGW User Manual page 16

 Maintenance and Inspection
• Do not disassemble the linear servomotor.
Failure to observe this caution may result in electric shock or injury.
• Do not attempt to change wiring while the power is ON.
Failure to observe this caution may result in electric shock or injury.
• When replacing the SERVOPACK, resume operation only after copying the
previous SERVOPACK parameters to the new SERVOPACK.
Failure to observe this caution may result in damage to the product.
• Be sure to eliminate static electricity before operating buttons and switches
inside the front cover.
Failure to observe this caution may result in damage to the product.
 Disposal
• When disposing of the products, treat them as ordinary industrial waste.
 General Precautions
Observe the following general precautions
• The products shown in illustrations in this manual are sometimes shown without cov-
ers or protective guards. Always replace the cover or protective guard as specified
first, and then operate the products in accordance with the manual.
• The drawings presented in this manual are typical examples and may not match the
product you received.
• If the manual must be ordered due to loss or damage, inform your nearest Yaskawa
representative or one of the offices listed on the back of this manual.
www.dadehpardazan.ir 88594014-15
CAUTION
CAUTION
to ensure safe application.
xv