YASKAWA SGLGW User Manual page 94

(2) SGDV-A15
 Using a Three-phase, 200-V Power Supply
Power supply
Three-phase 200 VAC
R S T
Molded-case
circuit breaker
(MCCB)
Protects the power
supply line by shutting
the circuit OFF when
overcurrent is detected.
Noise filter
Used to eliminate
external noise from
the power line.
Regenerative
resistor*
Linear servomotor
main circuit cable
 Before connecting an external regenerative resistor to the SERVOPACK, refer to 3.4 Con-
necting Regenerative Resistors.
www.dadehpardazan.ir 88594014-15
SGDV- A15
SERVOPACK
Magnetic
contactor
Turns the servo
ON and OFF.
Install a surge
absorber.
Cable for connecting a
serial converter unit
Cable for connecting a
linear scale
Linear scale
(Not included)
3.2 System Configuration Diagram
Connect to the
MECHATROLINK-II
Connection cable
for digital operator
Connection cable
for personal computer
I/O signal cable
Serial converter unit
Digital
operator
Personal
computer
Host controller
When not using the safety function,
use the SERVOPACK with the safety
function jumper connector
(JZSP-CVH05-E, provided as
an accessory) inserted.
When using the safety function,
insert a connection cable
specifically for the safety function.
Safety function
devices
Cable for connecting a
hall sensor
Linear servomotor
with core
3
3-9