YASKAWA SGLGW User Manual page 96

(3) SGDV-D15A
Power supply
Three-phase 400 VAC
R S T
Molded-case
circuit breaker
(MCCB)
Protects the power supply
line by shutting the
circuit OFF when
overcurrent is
detected.
Noise filter
Used to eliminate
external noise from
the power line.
Magnetic
contactor
Turns the servo
ON and OFF.
Install a surge
absorber.
∗
24 VDC
1
power supply
Regenerative
resistor * 2
Linear servomotor
main circuit cable

Use a 24 VDC power supply with double insulation or reinforced insulation. (The power
supply is not included)

Before connecting an external regenerative resistor to the SERVOPACK, refer to 3.4 Con-
necting Regenerative Resistors.
www.dadehpardazan.ir 88594014-15
SGDV- D15A
SERVOPACK
Cable for connecting a
linear scale
Linear scale
(Not included)
3.2 System Configuration Diagram
Connect to the
MECHATROLINK-II
Connection cable
for digital operator
Connection cable
for personal computer
I/O signal cable
When not using the safety
function, use the SERVOPACK with
the safety function jumper connector
(JZSP-CVH05-E, provided as an
accessory) inserted.
When using the safety function,
insert a connection cable
specifically for the safety function.
Safety function devices
Cable for connecting a
serial converter unit
Serial converter unit
Digital
operator
Personal
computer
Host controller
Cable for connecting a
hall sensor
Linear servomotor
with core
3-11
3