Beckman Coulter UniCel DxC 600 Instructions For Use Manual page 198

Sample Programming and Processing
Sample Programming and Processing
1
Select
Samples
2
Identify samples using the list below:
If the sample has a readable bar code:
• Type the Sample ID.
• If previous programming appears, it may be necessary to clear it.
• If no previous program appears, go to Step 3.
If the sample has no bar code or bar code can not be read:
• Type the Sample ID.
• Type the numbers in the
3
If the sample is stat, select the
4
Select
Sample Type
NOTE
The sample type for UDR must be serum, plasma, CSF or urine. Do not use any other sample type.
5
Select
Sample Comment
6
To enter Demographics, select
return to the
7
Select each chemistry and/or select a panel. To access additional chemistries, use the up and
down arrows to move to other pages.
8
Select
Next F10
9
To program additional samples, repeat Steps 2-10.
10
Place the samples into assigned rack positions.
6-8
from the menu bar.
and
Rack
check box.
STAT
from the pull-down menu.
from the pull-down menu.
Demog F2
screen.
Program Sample
.
fields.
Pos
. Type the information provided and select to
Next F10
A13914AF