Multi Move Settings - Sony DVS-9000 User Manual

Masking the Blur effect with a selected pattern
Press [Mask] to display the Mask menu, and set the pattern type and modifiers.
For details, see "Mask Settings" (page 68).

Multi Move Settings

This effect shrinks the image and lines up a number of copies vertically and
horizontally.
For an illustrative figure and other information, see "DME Special Effects" in
Chapter 1 (Volume 1).
Applying the Multi Move effect
1
2
3
56
DME Special Effect Operations
• When Key is selected (with SDI-interfaced MVE-8000A/MVE-9000)
Knob Parameter Adjustment
1 H Horizontal defocusing of key
signal
2 V Vertical defocusing of key signal 0.00 to 100.00
3 All Horizontal and vertical
defocusing of key signal
In the DME menu, select VF2 'Video Modify' and HF2 'Multi Move.'
The Multi Move menu appears.
Press [Multi Move], turning it on.
The Multi Move effect is enabled. You can adjust the center point of
shrinking, the ratio of shrinking, and the aspect ratio of the shrunken
images with the knobs.
Set the parameters.
The valid ranges of the parameter values depend on the aspect ratio (4:3/
16:9) selected in the system, as follows.
• 4:3 mode
Knob Parameter
1 Center X
2 Center Y
3 Size
Adjustment
x-value of shrinking center point –4.00 to +4.00
y-value of shrinking center point –3.00 to +3.00
Shrinking ratio
Setting values
0.00 to 100.00
H value shown
Setting values
0.00 to 100.00