Angle Of Contact To Slip Rings Diagram; Brush Alignment Template Diagram; Repair Of Lead Strap Diagram - Piper Navajo Chieftain PA-31-350 Service Manual

RUBBER
NAVAJO CHIEFTAIN SERVICE MANUAL
BRUSH BLOCK ASSY
PORTION OF STARTER RING /
GEAR SLIP RING ASSY.
BRUSH -
ASSEMBLY
SLIP RING
SURFACE
1. Note direction of slip ring rotation.
2. Place template against face of Brush Assembly.
3. Slide Brush Assembly forward until Template meets
Slip Rings.
4. Tighten Brush Assembly and remove Template.
Figure 14-15a.. Angle of Contact to
Slip Rings
Figure 14-25b. Brush Alignment
Template
NEOPRENE PATCH
1300 L CEMENT
DEICER LEAD STRAP
WOODEN BLOCK
OR
BUCKING
BAR MAY BE USED WHEN
SECTION A A NECESSARY FOR SUPPORT
A
NEOPRENE PATCH
CEMENTED OVER
EXPOSED FABRIC
Figure 14-16. Repair of Lead Strap
Revised: 3/31/94
ACCESSORIES AND UTILITIES
4F5