Lubrication Chart (Landing Gear. Main) - Piper Navajo Chieftain PA-31-350 Service Manual

SEE NOTES
2 AND 3
I
NAVAJO CHEIFTAIN SERVICE MANUAL
COMPONENT
1 GEAR DOOR OUTBOARD HINGES AND CONTROL
RODS RIGHT AND LEFT
2 GEAR OLEO STRUT FILLER RIGHT AND LEFT (SEE
SPECIAL INSTRUCTION 4 AND CAUTION 1)
3 GEAR DOWNLOCK HOOK CONTROL ROD AND CABLE ENDS
AND BELLCRANK RIGHT AND LEFT
4 WHEEL BEARINGS RIGHT AND LEFT
5 GEAR TORQUE LINK FITTINGS RIGHT AND LEFT
6 GEAR SIDE BRACE LINK BUSHING AND HOUSING
BUSHING RIGHT AND LEFT
7 GEAR UPLOCK HOOK CONTROL ROD AND CABLE ENDS
CYLINDER ENDS RIGHT AND LEFT
8
GEAR DOOR INBOARD HINGES AND CYLINDER
ENDS RIGHT AND LEFT
9 BRAKE AND POWER PACK RESERVOIR (SEE SPECIAL
INSTRUCTION 4 AND CAUTION 1)
10
GEAR UPLOCK ROD ASSEMBLY AND DOWN LOCK ROD
ASSEMBLY (SEE SPECIAL INSTRUCTION 8) (SEE NOTES 2 AND 31
11 UPLOCK BUSHING
LUBRICANT
MIL L7870
MIL-H-5606
MIL-L-7870
SEE SPECIAL INSTRUCTION 3
MIL G-23827
MIL L-7870
MIL L-7870
MIL-L-7870
MIL H-5606
MIL-G-3545
MIL L 7870
FREQUENCY
100 HRS
AS REQUIRED
100 HRS
100 HRS
100 HRS
100 HRS
100 HRS
100 HRS
AS REQUIRED
100 HRS
100 HRS
1 WIPE EXPOSED STRUT WITH CLEAN
CLOTH AND HYDRAULIC FLUID MIL-H-
5606.
2 CLEAN AND LUBRICATE WHENEVER
LANDING GEAR AND WHEEL AREA HAS
BEEN WASHED.
3. UPLOCK ROD USED ON AIRCRAFT
MODELS WITH S/N 31-5001 TO 31-
8252063 INCLUSIVE CABLE ASSEMBLY
USED ON AIRCRAFT MODELS WITH S/N
31-8252064 AND UP
Figure 2-12. Lubrication Chart (Landing Gear, Main)
Revised: 10/5/83
HANDLING AND SERVICING
1C8