Safety Wiring Control Surface Stops; Installation Of Elevator Rigging Tool Diagram; Elevator Travel Stops Diagram - Piper Navajo Chieftain PA-31-350 Service Manual

HINGE ASSY
RUDDER HINGE ASSY
NAVAJO CHIEFTAIN SERVICE MANUAL
1. ELEVATOR
2. RIGGING
TOOL
3. STABILIZER
1. STOP BOLT
2. STOP PLATE
3. TORQUE TUBE
4. RUDDER
5. ELEVATOR
Figure 5-7. Installation of Elevator Rigging Tool
Figure 5-8. Elevator Travel Stops
B904 AILERON BELLCRANK ASSY.
SEE NOTE 1 & 2
ASSY
SEE NOTE 1
ELEVATOR HINGE ASSY.
C24
SEE NOTE 1
SEE
NOTE 1 & 2
S/N: 31-8152083 AND UP
NOTES
AFTER STARTING WIRE THRU HEAD OF
SCREW MAKE ONE COMPLETE WRAP
AROUND SHANK OF SCREW NEXT TO JAM
NUT FINISH WIRING THRU HOLES PRO-
VIDED IN FORGING. INSTALL SAFETY WIRE
THRU HEAD OF SCREW WITH WET ZINC
CHROMATE.
THE LOCK WIRE SHOULD ALWAYS BE
INSTALLED AND TWISTED SO THAT THE
LOOP AROUND THE HEAD STAYS DOWN
AND DOES NOT TEND TO COME UP OVER
THE BOLT HEAD AND LEAVE A SLACK LOOP
Figure 5-8a. Safety Wiring Control Surface Stops
Revised: 9/24/81
SURFACE CONTROLS
1115