Fuel Selector And Crossfeed Valve Control Cables - Piper Navajo Chieftain PA-31-350 Service Manual

Hide thumbs Also See for Navajo Chieftain PA-31-350:
Table of Contents

Advertisement

NAVAJO CHIEFTAIN SERVICE MANUAL
3-14. INSPECTION OF FUEL SELECTOR AND CROSSFEED VALVE CONTROL CABLES. (Refer to
Figure 3-6.) At each 100 hour inspection of the airplane, inspect the fuel selector and cross feed valve control
cable wires. Conduct the inspection as follows:
a. Remove the access cover located on the underside of the fuselage, below the fuel selector panel
just ahead of the main spar and the access panel between the fuselage and the underside of the wing.
b. Remove console cover
c. Visually check control cable wires at swivel fittings for indications of binding, kinks or bends:
have someone in cockpit operate fuel controls while mechanic inspects wires at swivel fittings.
d. Replace cable(s) exhibiting any of the above conditions.
e. Check adjustments of selector valve and cross feed valves per Section IX.
f. Replace access panels and covers.
FUEL SELECTOR
CROSSFEEED
CLEVIS
Figure 3-6 Fuel Selector and Crossfeed Valve Control Cables
Revised: 3/31/94
INSPECTION
1E5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents