Saving Measurement Results To Disk - HP 8712ET User Manual Supplement

Table 8-1

Saving Measurement Results to Disk

The analyzer provides two internal RAM disks and one internal 3.5 inch
floppy disk to which measurement results can be saved.
For the fastest saves, measurements should be saved to RAM disk. From
RAM disk, they can be copied to the internal floppy disk by pressing
File Utilities Copy All Files
SAVE RECALL
command
MMEM:COPY 'MEM:*.*', 'INT:'
or
MMEM:COPY 'RAM:*.*', 'INT:'
The following mass storage specifiers can be used:
Mass Storage Specifiers
Disk
Non-Volatile RAM Disk
Volatile RAM Disk
Internal 3.5 in Disk
The files can also be transferred over HP-IB using the SCPI command
MMEM:TRANsfer. Refer to the Example Programs Guide for details.
Automating Measurements
Saving Measurement Results
Saving Measurement Results to Disk
, or using the SCPI
SCPI name
MEM:file
RAM:file
INT:file
8-7