Connecting The Interconnecting Hosepack; Connecting The Gas Cylinder - Fronius TransSteel 3500 Operating Instructions Manual

Connecting the
IMPORTANT!
interconnecting
Gas-cooled systems are not fitted with a cooling device.
hosepack
The water connections therefore do not need to be connected for gas-cooled systems.
1
1
Connecting the
gas cylinder
If gas cylinders topple over, there is a risk of very serious injury and damage.
When using gas cylinders
► Place them on a solid, level surface in such a way that they remain stable
► Secure the gas cylinders to prevent them from falling over
► Fit the VR holder option
Follow the gas cylinder manufacturer's safety rules.
1
1
NOTE!
US devices are supplied with an adapter for the gas hose:
► Seal male thread spacers on the gas solenoid valve using suitable means before
► Test the adapter to ensure that it is gas-tight.
WARNING!
screwing on the adapter.
2
2
7
6
3
1
4
5
2
Briefly open the gas cylinder valve to
-
blow off any dust or dirt
- Check the seal on the pressure regula-
tor
45