Copy Card Reader-F1; Super G3 Fax Board-As1 - Canon imageRUNNER ADVANCE 8500 III Series Customer Expectation Document

6.21 Copy Card Reader-F1

Item
Available Cards
Card Readout Method
Magnetic Card Reading
Direction
Store/Replay
Power Source
Dimensions (H x W x D)
Weight

6.22 Super G3 FAX Board-AS1

Protocol
Telephone Line Used
Scan Line Density
(Scan, Transmission)
Transmission Speed
Compression Method
Transmission Type
Sending Original Size
Receiving Paper Size
Transmission Times
Auto Dial Function
Image Memory
53 Excludes the attachment kit and cable.
54 The specifications remain the same even when the optional Super G3 2
rd th
3 /4 Line Fax Board-AS1 is installed.
55 If the user uses an IP telephone service, facsimile communications may not be performed normally via an IP
telephone line. It is recommended to use a general telephone (Public Switched Telephone Network) line for
facsimile communications.
56 Pels stands for picture elements (pixels).
Version 1 imageRUNNER ADVANCE 8500 III Series Customer Expectations Document
imageRUNNER ADVANCE 8500 III Series Customer Expectations Document
Magnetic
Magnetic readout
Face up
Replay
From the main unit.
53
1 5/8" x 3 1/2" x 3 3/4" (40 mm x 88 mm x 96 mm)
Approximately 7.1 oz (200 g) (Includes the attachment kit and cable.)
55
Public Switched Telephone Network
Standard: 8 pels
Fine: 8 pels
Super-Fine: 8 pels
Ultra-Fine: 16 pels
Super G3: 33.6 kbps
G3: 14.4 kbps
MH, MR, MMR, JBIG
Super G3, G3
11" x 17" to STMTR
11" x 17" to STMTR
JBIG: Approximately 2.6 seconds
Address Book: 1,800 destinations
(Including destinations stored in one-touch buttons.)
Approximately 6,000 pages
Specifications
54
Specifications
56
/mm x 3.85 line/mm
56
/mm x 7.7 line/mm
56
/mm x 15.4 line/mm
56
/mm x 15.4 line/mm
nd
Line Fax Board-AS1 or Super G3
Page 79