Menu Switch Settings (#2 Menu) - Canon iR1200 Series Service Manual

CHAPTER 2 USING THE MACHINE

3.5 Menu Switch Settings (#2 MENU)

No. Item
005 NL equalizer
006 telephone line monitor
007 transmission level (ATT)
008 V.34 modulation speed upper limit
009 V.34 data speed upper limit
010 pseudo CI signal frequency
005 NL equalizer
Use it to turn on/off the NL equalizer.
Turn on the NL equalizer if an error occurs often because of the line condition at time of
communication.
The following error codes are associated with the line condition at time of
transmission.
Memo
##100, ##101, ##102, ##104, ##201, ##281, ##282, ##283, ##750, ##755,
##765, ##774, ##779, ##784, ##789
The following error codes are associated with the line condition at time of
reception
##103, ##107, ##114, ##201, ##790, ##793
006 telephone line monitor
Use it to set telephone line motor functions:
DIAL:
SERVICEMAN [1]:
SERVICEMAN [2]:
OFF:
2-48
COPYRIGHT © 2002 CANON INC.
Selection
ON, OFF
DIAL/SERVICEMAN
[1]/SERVICEMAN[2]/OFF
0 through 15 (ex:15=-15dBm)
3429, 3200, 3000, 2800, 2743, 2400
from 2.4 to 33.6 kbps
50Hz, 25Hz, 17Hz
Select it to generate a monitor sound for the telephone line from
the start of transmission to DIS.
Select it to generate a monitor sound of the telephone line from
the start of a communication to its end.
not used
Select it to mute the monitor sound for the telephone line for the
speaker.
2000 2000 2000 2000
Initial setting
OFF
DIAL
10
3429
33.6
25Hz
CANON iR1200/iR1300 Series REV. 0 AUG. 2002