Functions; Network Scan - Mitsubishi Electric MELSEC iQ-R Series User Manual

3.3

Functions

This section describes the functions of CANopen Configuration Tool.

Network scan

CANopen Configuration Tool can scan for all CANopen nodes connected to CANopen.
When a CANopen node is found, information for "Node ID" and "Product name" is displayed in the list on the left side of the
"Network scan" window.
The scan time can be shortened by limiting the node ID scan range.
Operation method
The "Network scan" window can be displayed by the following operation.
[Diagnostics]  [Network scan]
Item
Found CANopen nodes
Current Node ID
Node ID area selection
Description
Click the [Scan] button to display the scan results.
Information for "Node ID" and "Product name" is displayed in the list.
Displays the status of scan progress.
For a node ID scan, a choice can be made from "All", "Starting from", and "Range".
When "Starting from" is selected, specify any number for "Start Node ID". (1 to 127)
When "Range" is selected, specify any number for "Start Node ID" and "End Node ID". (1 to 127)
3 CANopen Configuration Tool
3.3 Functions
3
113