3.
Set the interface on the PLC side and click the [Next] button.
Item
PLC side I/F
Host(IP Address)
[Find CPU (Built-in Ethernet port) on
network] button
When the [Find CPU (Built-in Ethernet port) on network] button is clicked, a search is made for a CPU with
built-in Ethernet port on the same network, and its IP address, CPU type, label, and comment are displayed.
Click the [OK] button to input the selected IP address to "Host (IP Address)".
Description
Select an interface on the PLC side. (Fixed as "CPU module")
Set the PLC side IP address.
Searches for a CPU with built-in Ethernet port on the same network through
connection via a hub.
Setting range
• Blank
• 0.0.0.1 to 223.255.255.254
(Default: Blank)
3 CANopen Configuration Tool
3.2 Setting Procedure
3
105