■When connecting via Ethernet
1.
In the "Transfer Setup" window, click the [Configure] button and create a list of settings. Click the [OK] button to open the
setup wizard.
2.
Set the interface on the computer side and click the [Next] button.
Item
PC side I/F
Connect module
Protocol
Time out
3 CANopen Configuration Tool
104
3.2 Setting Procedure
Description
Select an interface on the computer side.
Set the module. (Fixed as "CPU module")
Set the communication protocol.
Set the communication timeout time. (Unit: ms)
Setting range
• USB
• Ethernet board
(Default: USB)
• TCP
• UDP
(Default: TCP)
1 to 2147483647
(Default: 1000)