Preparing For A Measurement; Selecting Measurement Mode - JDS Uniphase CellAdvisor JD720C Series User Manual

Figure 50
No.

Preparing for a measurement

Selecting measurement mode

Procedure
1
2
2 port transmission measurement screen
Description
Measurement Mode Name
Measurement Chart
Trace(s) – Up to 4 traces
Marker(s) – Up to 6 markers
Readout for Active Marker
Trace Legend – For "Indoor" display mode
Trace 1
Trace 2
Trace 3
Trace 4
Measurement Setting Information
Screen Menu and Screen Keys
Press the MODE hard key and then select the Single Layout tab.
Double-tap the 2 Port Transmission icon.
NOTE
You can choose two measurement modes from each window in the Horizontal Layout or
CellAdvisor JD720C Series User's Manual
C
Active Marker Captured Trace
for each trace
W
Current Trace (Clear Write)
L
Loaded Trace
F
Trace Off
Chapter 10 2-Port Transmission Testing
87