Chapter 14 Optical Power Testing
Preparing for a measurement
Selecting measurement mode
Procedure
1
2
Connecting a power meter
Connecting an external optical power meter is mandatory for power measurements in the
Optical Power Meter mode. There are two optical power meters (sensors) available to be
used with the instrument via USB connection. See "Optical power meters" on page 169 for
available options.
Procedure
1
2
Figure 71
112
Press the MODE hard key and then select the Single Layout tab.
Double-tap the Optical Power icon.
Connect your optical power meter to one of the USB Host ports of the JD720C series.
The instrument detects and initializes the connected power meter automatically and displays its
model number, power meter type, and firmware version on the screen.
Optional. To check the connected power meter's device information such as model number, type,
and FW version, complete the following steps:
a
Press the SETUP hard key.
b
Touch the Device Information tab.
The Device Information window appears as shown in Figure 71.
c
Tap the Cancel button to exit.
Device information window for optical power measurements
CellAdvisor JD720C User's Manual