Table of Contents
Advertisement
Chapter 3 Getting Started
Power and battery indicators
Indicator
Measurement display pane
There are three display layouts available: single, dual horizontal and dual vertical. For the
dual layout modes, the screen displays two measurement panes horizontally or vertically.
Trace and measurement setting information bar
This bar shows information about traces and measurement settings for the displayed
measurement.
Screen menu bar
The screen menu bar displays a set of screen keys at the bottom of the screen when you
press the MARKER, PEAK, TRACE, or LIMIT hard key. You can tap a screen key to execute
its function as needed.
Installing battery pack
You need to install the Lithium Ion battery pack provided with your instrument.
Procedure
To install the battery pack:
1
2
3
4
5
To remove the battery pack:
1
2
3
30
Description
DC Supply: Indicates that external power is supplied to the instrument. The installed battery is
charged when the external power supply is connected.
Battery: Indicates that the instrument has a battery pack in it and shows the remaining battery
level or charging status in percentage.
Loosen the latching screw of the battery cover by
turning counter clockwise.
Slide out the battery cover to open.
Insert the battery pack with the connector
terminal side faced rear and push in until it stops.
Slide in the battery cover back to close.
Tighten the latching screw of the battery cover by
turning clockwise.
Loosen the latching screw of the battery cover by turning counter clockwise.
Slide out the battery cover.
Hold the battery strap and pull it out.
CellAdvisor JD720C User's Manual
Advertisement
Table of Contents
