Chapter 18 System Setting and Maintaining
Figure 107 Service diagnostic window
Running self-test
You can run a self-test on the Tx and Rx modules over the full frequency range.
Procedure
1
2
3
4
5
Viewing system log
You can view a list of all the system logging data including errors in your instrument.
Procedure
1
2
3
4
160
Tap the Run Self Test button.
Disconnect any cable connected to the RF Out / Reflection port.
The confirmation dialog box appears.
Tap the OK button to confirm.
The Self Test progress bar appears.
At the completion, check the test result.
If FAILED is displayed, contact your nearest JDSU's authorized service provider.
Tap the Exit button to return to the measurement screen.
Tap the System Logging button.
The System Logging window appears.
Scroll up and down and find any errors logged.
Optional. To save the current logging data as a file (.log), complete the following steps:
a
Tap the Save Log button.
b
Highlight a folder or location, to which you want to save.
c
Tap the Save button.
Optional. To delete the logging data, tap the Clear button.
CellAdvisor JD720C User's Manual