Table of Contents
Advertisement
Appendix
JDRemote setup
Procedure
1
2
3
4
5
6
7
8
Figure 110 JDRemote screen
182
Launch the JDRemote application.
The Select Model dialog box appears.
Select the 720C Series, and then click the OK button.
Right-click on the JDRemote window, and then click the Communication.
The Communication dialog box appears.
Select the TCP/IP, and then enter 192.168.10.10 without dots.
Click OK to finish the communication setup.
Right-click on the JDRemote window, and then click the Connect.
This enables communication between the instrument and JDRemote.
Right-click on the JDRemote window again, and then click the Start.
Your JD720C instrument's screen appears on the JDRemote screen in real time as shown in
Figure 110.
Optional. To adjust the image quality, complete the following steps:
a
Right-click anywhere on the JDRemote.
b
Click the Quality.
c
Select the image quality option among High, Medium, and Low.
You can improve refresh rate, if experiencing low-quality signal, by adjusting the image
quality in JDRemote.
CellAdvisor JD720C User's Manual
Advertisement
Table of Contents
