Table of Contents
Advertisement
Chapter 17 Operation
7
8
9
Figure 91
Using favorite key
The FAVORITE hard key enables you to save a frequently used measurement setup or test
configuration as a favorite setup, including measurement mode, frequency range, display
layout, marker positions, etc. You can add up to 9 setups to the Favorites list.
Procedure
1
2
140
If the Screen is selected, the Colors Inversion appears and you can turn it on or off
by selecting On or Off. If the Setup is selected, it saves a test configuration only, not
including limit setting. You must select Limit to save limit settings for your
measurement.
If there is a test that you run often, you can also save the frequently used setup with
the FAVORITE hard key. See "Using favorite" on page 140 for more information.
Tap the File Name field to name your file.
The on-screen keyboard appears.
Type a file name in the Name field by touching keys on the on-screen keyboard.
See "Using on-screen keyboard" on page 146 for details.
Tap the Save button in the lower-right corner of the keyboard screen.
The on-screen keyboard dismisses and the measurement screen appears.
NOTE
If the Report is selected, tapping the Save button brings up a pop-up window where
you can type in information that will be included in a report.
Save window
Press and hold the FAVORITE hard key for a few seconds.
The on-screen keyboard appears.
Type a name in the Name field by touching keys on the on-screen keyboard.
See "Using on-screen keyboard" on page 146 for details.
NOTE
A file with the file extension .sta is created in the default Favorite directory of the
CellAdvisor JD720C User's Manual
Advertisement
Table of Contents
