Table of Contents
Advertisement
internal memory. You cannot change the location.
3
Tap the Apply button in the lower-right corner of the screen.
Using quick save key
The QUICK SAVE hard key enables you to save an active trace or screen according to your
configuration set in Quick Save Setup in advance.
Procedure
To quick save an active trace or screen:
1
Simply press the QUICK SAVE hard key.
The file name information bar appears in the lower-left corner of the screen and dismisses when
saving is done.
NOTE
You can load the quick-saved file by using the SAVE/LOAD hard key. See "Using
save/load" on page 143 for more information.
To configure Quick Save Setup:
1
Press the SAVE/LOAD hard key and then touch the Quick Save Setup tab.
The Quick Save Setup window appears as shown in Figure 92.
2
In the file manager pane on the left-hand side, highlight a folder or location in the internal memory
or in your USB memory drive, to which you want to save.
The selected destination is displayed in the Save to information area.
3
Select the Auto Increment option from the choices: Timestamp and Number.
NOTE
If you select Timestamp, saving date and time information is added after the prefix
that you set in the File Name box, e.g. "Quick_111211122128.tra". If you select
Number, an incremental number is inserted, e.g. "Quick_1".
To change the default file name prefix "Quick_" to your choice, complete the following steps:
4
a
Touch the File Name box.
The on-screen keyboard appears.
b
Type a new prefix by touching keys on the on-screen keyboard.
See "Using on-screen keyboard" on page 146 for details.
c
Tap the Save button in the lower-right corner of the keyboard screen.
The on-screen keyboard dismisses.
5
Select one or more File Type options from the choices as needed:
–
Trace: To save a trace as .tra file type.
–
Screen: To save a screen as .png file type with or without color inversion.
–
Report: To save a screen in a report format as .pdf file type.
NOTE
In the dual display mode or in the single display with enabled zoom zone(s), selecting
Trace generates multiple trace files for all the measurement display panes. For
example, it saves like xxx_T.tra for the top pane, xxx_B.tra for the bottom one if in the
horizontal display mode or xxx_M.tra, xxx_Z1.tra, and xxx_Z2.tra if in the single
CellAdvisor JD720C Series User's Manual
Chapter 17 Operation
141
Advertisement
Table of Contents
