JDS Uniphase CellAdvisor JD720C Series User Manual page 26

Chapter 3 Getting Started
Figure 3
No.
15 V DC port
This port is used to plug in the included AC/DC power adapter to run the instrument with
external power supplied from the wall unit. The orange LED illuminates when connecting the
external power.
RF Out / Reflection port
The RF Out / Reflection port is a precise 50 Ω N-type female connector that is used as the
output signal port for 1 port measurements. The maximum power level of the port is +25
dBm.
26
USB host ports – USB memory, RF power sensor, optical power meter, fiber microscope, GPS
receiver, and Bluetooth adapter
USB client port – JDViewer and JDRemote
RS-232C serial port – RF power sensors
JD725C Top panel view
Description
15 V DC port
RF Out 50 Ω and Reflection port
RF In 50 Ω port
LAN port
USB host ports – USB memory, RF power sensor, optical power meter, fiber microscope, GPS
receiver, and Bluetooth adapter
USB client port – JDViewer and JDRemote
RS-232C serial port – RF power sensors
CAUTION
Do not apply or connect power exceeding +25 dBm to this RF Out/Reflection port. If such
power is applied, it will degrade the product's performance and can cause damage to the
product in worst case.
CellAdvisor JD720C User's Manual