Table of Contents
Advertisement
Chapter 17 Operation
Figure 103 Horizontal layout window
Vertical layout
You can select the Vertical Layout to display two measurement modes on the screen as
shown in Figure 104.
Figure 104 Vertical layout window
Connecting GPS receiver
If you have installed the GPS Connectivity option, you can connect a USB GPS receiver to
the instrument so that you can view and save GPS information tied to the captured data. It
makes it easy to find if data capturing was made at the correct locations and what location
the data were taken.
Connecting GPS receiver
Procedure
1
2
152
Plug in your GPS receiver to one of the USB ports in your JD720C series.
Your instrument recognizes the connected antenna automatically and displays your test site's
GPS information on the screen.
If the GPS receiver has not been used for a long time or your test site has been moved requiring
new GPS information, you must re-initialize your GPS receiver using the Cold Start function.
a
Tap on the data and time
The Date and Time window appears with the GPS Cold Start button.
CellAdvisor JD720C User's Manual
shortcut.
Advertisement
Table of Contents
