Chapter 8 1-Port Phase Testing
Introducing 1-port phase measurements
You can use 1 Port Phase mode to measure S
phase match cables.
Display screen
Figure 39 shows an example of 1 Port Phase measurements.
Figure 39
No.
72
1 port phase measurement screen
Description
Measurement Mode Name
Measurement Chart
Trace(s) – Up to 4 traces
Marker(s) – Up to 6 markers
Readout for Active Marker
Trace Legend – For "Indoor" display mode
Trace 1
Trace 2
Trace 3
Trace 4
Measurement Setting Information
Screen Menu and Screen Keys
CellAdvisor JD720C User's Manual
phase when you want to tune antennas and
11
Active Marker
C
Captured Trace
for each trace
W
Current Trace (Clear Write)
L
Loaded Trace
F
Trace Off