8
Figure 93
Performing load
You can load a saved active trace, user setup, measurement screen, and limit setting as
needed. If the serial number of the instrument stored in the setup file matches with the serial
number of the loading instrument, the instrument loads valid calibration status as well.
Using save/load key
Procedure
1
2
3
4
occurrs.
–
Off: Saves all failure events continuously re-occurring.
Tap the Apply button to save the changes and exit.
Save on event window
Press the SAVE/LOAD hard key.
The Save/Load window appears.
Touch the Load tab.
The Load window appears as shown in Figure 94.
Navigate the file manager and select a file in the internal memory or in your USB memory drive,
from which you want to load.
The file properties appear in the File Information pane.
Tap the Load button in the lower-right corner of the screen.
NOTE
You can also load the frequently used setup that you saved by using the FAVORITE
hard key. See "Using favorite" on page 140 for more information.
CellAdvisor JD720C Series User's Manual
Chapter 17 Operation
143