Table of Contents
Advertisement
Appendix
Appendix F – Device driver installation
The JD720C series can be controlled from the application software JDViewer or JDRemote
installed on your computer. You must install driver software for the instrument on to your
computer if USB Client connection is used for communication. Following is an example of
procedure done with Windows 7.
Procedure
1
2
3
4
5
6
7
Figure 109 Device manager screen
176
On your computer, go to Control Panel > System > Device Manager.
The Device Manager window appears.
Right-click the Unknown Device under the Other Devices, and then click the Update Driver
Software.
The Update Driver Software – Unknown Device window appears as shown in Figure 109.
Select the Browse my computer for driver software, and then click the Browse button to
search for the location where the driver software is.
The Browse For Folder window appears.
Search for the JDRemote folder, and then select the driver folder for the installed OS.
For example, OSDisk (C:) > Program Files (x86) > JDRemote > Driver > Win7 > 64bit.
Click the OK button.
The Browse For Folder window dismisses.
Click the Next button to start installation.
If the Windows Security window appears, select the Install this driver software anyway.
Installing driver software starts.
Click the Close button at the end of the installation.
CellAdvisor JD720C User's Manual
Advertisement
Table of Contents
