Advertisement
Quick Links
Advertisement
Related Manuals for JDS Uniphase TT100
Summary of Contents for JDS Uniphase TT100
- Page 1 Tone Tracer, High-sensitivity User's Guide www.jdsu.com/know...
- Page 3 Battery Low Volume (on side) Tip Change Screw (on bottom) “ON” Button Battery Door Screw (on bottom) Headset Lanyard Loop Jack...
- Page 4 Warning! Do not touch to live AC circuits. This could cause an extreme shock hazard and damage the TT100. Features • Ergonomic shape with soft edges • Volume control • Recessed “on” switch • Tip replacement without opening case •...
- Page 5 Instructions for Use To trace a tone ) Connect an audio frequency tone generator, such as the TG00, to cable to be traced. Application Hints When tracing wires terminated to a terminal block such as a “66 block”, attaching both generator leads to the cable or pair tends to contain the signal within the cable.
- Page 6 ) Press the recessed black button to turn on the TT00. The power is on only as long as the button is being pressed. The battery low LED flashing on during turn on and turn off is normal. ) Adjust volume to a comfortable level. If the signal is very loud when near the cable, the volume may need to be reduced to keep from overloading the...
-
Page 7: Battery Replacement
To Change the TIP ) Remove screw nearest to the tip on the back of the TT00 with a # Philips screwdriver. ) Pull the tip out of the front. ) Push new tip into front. 4) Replace screw and tighten (about 4 in- lbs), being careful not to over tighten. - Page 8 Models, options & accessories Order Description number TT00 Tone Tracer Replacement paddle style tip TT5 for probes Replacement round tip for TT0 probe Headset with boom LB40B microphone, mini over-the-ear, .5mm jack Headset with cushioned ear LB45B piece, full over-the-head, .5mm jack PC00 Nylon pouch for one tone tracer...
- Page 9 Turbo-Tone high power tone generator with angled bed-of- KP04 nails clips TG0 and probe TT00 kit in a nylon pouch Turbo-Tone high power tone generator with alligator clips KP05 TG00 and probe TT00 kit in a nylon pouch Latch-Test security/alarm tone generator with alligator clips KP0 TG00 &...
-
Page 10: Customer Services
Customer Services This section provides a description of customer services available through JDSU (including returns policies and procedures) and warranty information. Customer Service (Standard Services) Customer Service accompanies the sale of every JDSU product. Customer Service services include: • Technical Assistance (Business Hour) •... - Page 11 manufactured equipment. This ensures products meet all published specifications, including any applicable product updates. Calibration — JDSU’s calibration methods are ISO approved and based on national standards. Factory Upgrades — Any unit returned for a hardware feature enhancement will also receive applicable product updates and will be thoroughly tested, ensuring peak performance of the complete feature set.
- Page 12 problem or service requested. • The name and telephone number of the person to contact regarding questions about the repair. • The return authorization (RA) number (US customers), or reference number (European Customers). If possible, return the equipment using the original shipping container and material.
-
Page 13: Warranty Information
Warranty Information JDSU guarantees that its products will be free of all defects in material and workmanship. This warranty extends for the period of months for test instruments and months for cables from date of manufacture or purchase (proof of purchase required). - Page 14 is reused, recycled, or disposed of in an environmentally friendly manner, and in compliance with all applicable national and international waste legislation. It is the responsibility of the equipment owner to return the equipment to JDSU for appropriate disposal. If the equipment was imported by a reseller whose name or logo is marked on the equipment, then the owner should return the equipment...
- Page 16 www.jdsu.com/know Document Information Doc. # TU9832 Revision 502, 06-08 English...