Table of Contents
Advertisement
Establishing a connection to StrataSync
If you have set up the Internet connection in your JD720C series, you can establish a
connection to StrataSync.
Procedure
1
Press the MODE hard key and then tap the System button.
2
Touch the StrataSync tab.
The StrataSync setting window appears as shown in Figure 108.
3
Enter <server address> in the Server Address field for StrataSync.
The server address at present is "stratasync.jdsu.com", which may change.
NOTE
JDSU provides you with the information required to access StrataSync at your
purchase of StrataSync, including the Server Address, Account ID, and Port number.
See "StrataSync subscription" on page 170 for more information on available options.
4
Enter <account number> in the Account ID field.
5
Enter <technician number> in the Technician ID field.
6
To set the port number and proxy server address, complete the following steps:
a
Tap the Detail Settings button.
The input dialog box appears.
b
Enter <port number> in the Port field.
c
Enter <proxy server address> in the Proxy Server address, if necessary.
Contact your system administrator for your proxy server information.
d
Tap the Apply button to save and exit.
7
Tap the Start Sync button.
Files are downloaded from the StrataSync server into your instrument's "Internal/StrataSync"
folder and then uploaded from the "Internal/StrataSync" folder to the StrataSync server. Once
successfully synchronized, the text "Successfully synchronized with server" appears and the
StrataSync status icon changes.
8
Tap the Apply button to exit.
NOTE
o
If you have encountered a failure to synchronize with the server, reboot your instrument
and then start it from the setting up the Internet connection.
CellAdvisor JD720C Series User's Manual
Chapter 18 System Setting and Maintaining
163
Advertisement
Table of Contents
