Table of Contents
Advertisement
Chapter 2 Getting Started
The white screen with a plus sign (+) in the upper-left corner appears.
3
Touch the plus sign and repeat until the previous screen is back on.
Using system administration
The Administration is used to disable editing limits, enable modifying online help, or change
administration password.
Logging in
You need to log in first to access the administration menus.
Procedure
1
Press the SYSTEM hot key.
2
Select More (1/2) > Administration. The password box appears.
3
Enter <password> by using the numeric keys.
Default password is "0000". To change the password, see "Changing password" on page 42.
4
Press the Apply soft key.
Changing password
Procedure
1
Press the SYSTEM hot key.
2
Select More (1/2) > Administration, and then enter your password.
3
Press the Change Password soft key. The new password box appears.
4
Enter a new password up to eight digits by using the numeric keys.
5
Press the Apply soft key. The reconfirmation box appears.
6
Enter the new password again by using the numeric keys.
7
Press the Apply soft key to complete changing password.
Locking limit key
You can lock the LIMIT hot key and disable editing predefined limit settings to prevent any
unintentional changes, which could result in incorrect measurements.
Procedure
1
Press the SYSTEM hot key.
2
Select More (1/2) > Administration, and then enter your password.
3
Toggle the Edit Limit soft key and select Disable to lock the LIMIT hot key or Enable to unlock
the key.
NOTE
Disabling the Edit Limit limits the access to the LIMIT hot key only. The Limit features
including displaying limit line(s) and Pass/Fail result function properly as predefined.
42
JD700B Series User's Guide
Advertisement
Table of Contents
