Table of Contents
Advertisement
Setting parameter
G(P)_CCPASET
Structured ladder/FBD
G_CCPASET
EN
ENO
Un*
s1
s2
s3
s4
The following instruction can go in the dotted squares.
G_CCPASET, GP_CCPASET
■Executing condition
Instruction
G_CCPASET
GP_CCPASET
■Argument
Input/output
argument
Input argument
Output argument
Setting
Internal device
*1
data
Bit
(s1)
(s2)
(s3)
(s4)
(d)
*1 Local devices and file registers per program cannot be used as setting data.
Processing details
This instruction sets parameters for master/local module (master station).
5 MODULE DEDICATED INSTRUCTION
188
5.4 Network Dedicated Instruction
CC IE F
d
ENO:=
G_CCPASET (EN, Un*, s1, s2, s3, s4, d);
Executing condition
Name
Description
EN
Executing condition
Un*
Start I/O number of the module
(00 to FE: Higher two digits when expressing the I/
O number in three digits)
s1
Variable that stores control data
s2
Start number of the host station's device that stores
network configuration setting data.
s3
Start number of the host station's device that stores
reserved station specification data.
s4
Start number of the host station's device that stores
error invalid station setting data.
ENO
Execution result
d
Variable that turns ON upon completion of the
instruction
d[1] also turns ON at the time of error completion.
R, ZR
Word
ST
J\
Bit
Word
Data type
Bit
ANY16
Array of ANY16 [0..3]
Array of ANY16 [0..599]
Array of ANY16 [0..7]
Array of ANY16 [0..7]
Bit
Array of Bit [0..1]
U\G
Zn
Constant
Others
Advertisement
Table of Contents
