Table of Contents
Advertisement
■Argument
Input/output
argument
Input argument
Output argument
Setting
Internal device
*1
data
Bit
(s1)
(s2)
(s3)
(s4)
(d)
*1 Local devices and file registers per program cannot be used as setting data.
Processing details
This instruction remotely switches a CPU module on another station to RUN.
Precautions
This instruction is applicable to the QJ71LP21 or QJ71BR11 with the function version B or later.
5 MODULE DEDICATED INSTRUCTION
172
5.4 Network Dedicated Instruction
Name
Description
EN
Executing condition
Jn*
Network number of the target station (1 to 239, 254)
254: Network specified in "Valid module during
other station access"
Un*
Start I/O number of the host station network No.
(00 to FE: Higher two digits when expressing the I/
O number in three digits)
s1
Channel used by host station
For the RRUN instruction, specify the channel used
by host station that is the same as the one used for
the RSTOP instruction.
s2
Target station number
(1) Station number specification
Host station is Universal model QCPU: 1 to 120
Host station is anything other than Universal model
QCPU: 1 to 64
(2) Group specification
81H to A0H: All stations of a group (No.1 to 32)
(3) All stations
FFH: All stations of the target network No. (Except
the host station)
To specify a group or all stations, specify '0000H' or
'03FFH' for the target station's CPU type (s3).
s3
Target station's CPU type
0000H: Target station CPU/control CPU/host
system CPU (Specified data are the same as
'03FFH'.)
03E0H: Multi-CPU No. 1/target station CPU (single
CPU system)
03E1H: Multi-CPU No. 2
03E2H: Multi-CPU No. 3
03E3H: Multi-CPU No. 4
03FFH: Target station CPU/control CPU/host
system CPU
s4
Mode
ENO
Execution result
d
Variable that turns ON upon completion of the
instruction
d[1] also turns ON at the time of error completion.
R, ZR
Word
J\
U\G
Bit
Word
Data type
Bit
String
String
ANY16
ANY16
ANY16
ANY16
Bit
Array of bit [0..1]
Zn
Constant
K, H
Others
Advertisement
Table of Contents
