Table of Contents
Advertisement
Program example
The following program writes 1-word data of D10 to the buffer memory address 111H of the number 63 intelligent device
station (AJ65BT-R2(N)) which is connected to the master module mounted on the I/O numbers from X/Y00 to X/Y1F.
The interlock signal storage settings are set to request device: RY4, completion device: RX4, error code storage device:
RWr1, and completion mode: 1.
(When the refresh device of the link special register (SW) is set to SW0.)
[Structured ladder/FBD]
5 MODULE DEDICATED INSTRUCTION
112
5.4 Network Dedicated Instruction
Process on normal completion
Process on error completion
Sets station number
Sets access code and attribute code
Sets buffer memory address
Sets number of write points
Sets request device
Sets completion device and error code storage area
device
Sets completion mode
Sets data to be written to intelligent device station
Performs writing
Turns execution flag ON
Turns write request OFF
Turns execution flag OFF
Advertisement
Table of Contents
