Switch (Sa-Sh); Digital Trim (T1-T4); Volume (Ld, Rd); Slide Lever (Ls, Rs) - FUTABA 14SG Instruction Manual

Switch (SA-SH)

(Switch Type)
• SA : 3 positions; Alternate; Short lever
• SB : 3 positions; Alternate; Long lever
• SC : 3 positions; Alternate; Long lever
• SD : 3 positions; Alternate; Short lever
• SE : 3 positions; Alternate; Short lever
• SF : 2 positions; Alternate; Long lever
• SG : 3 positions; Alternate; Short lever
• SH : 2 positions; Momentary; Long lever
*You can choose switch and set the ON/OFF-direction in
the setting screen of the mixing functions.
Digital Trim
T3
T4
Digital Trim T1, T2, T3 and T4:
This transmitter is equipped with four (4)
digital trims. Each time you press a trim button,
the trim position moves one step. If you continue
pressing it, the trim position starts to move faster.
In addition, when the trim position returns to
the center, the tone will change. You can always
monitor trim positions by referencing the LCD
screen.
*You can select the trim step amount and the display unit
on the home screen on the T1-T4 setting screen within the
linkage menu.
Note: The trim positions you have set will be stored in the
non-volatile memory and will remain there.
Volume
LD RD
Volume LD and RD:
The volume LD and RD knobs allow for
analog input.
*The T14SG transmitter beeps when the volume knob
reaches the center position.
*You can use each setting screen of the mixing functions to
select volumes and define the direction of a movement.
Slide Lever
LS (Left), RS (right):
T2
T1
HOME/EXIT and U.MENU/MON. Button
LS
The slide lever LS and RS offer analog input.
*The T14SG transmitter beeps when the lever comes to the
center.
*You can select a slide lever and set the movement
direction on the setting screen of mixing functions.
HOME/EXIT U.MENU/MON.
Button
RETURN
HOME/EXIT:
Return to the previous
Press
Return to the Home
Press and hold
It pushes from HOME
To TELEMETRY display
screen.
Push and hold for
one (1) second from Key lock On or Off
HOME screen.
U.MENU/MON.:
Press To SERVO MONITOR display
Press and hold To User Menu display
<Before Use>
RS
Button
screen
screen
15