Display When Power Switch Is Turned On; Lcd Screen Contrast; Power Off Forgotten Alarm - FUTABA 4pls Instruction Manual

Display when power switch is turned on

Battery voltage display
Model name (10 characters)
The current receiver mode is
displayed.

LCD Screen Contrast

The LCD screen contrast can be adjusted. (For more information, see page 101.)
Caution
Do not adjust the contrast so that the LCD is too bright or too dark.
When the display cannot be read due to a temperature change, data cannot be set.

Power Off Forgotten Alarm

When the steering wheel, throttle trigger, push switch, or edit button are not operated
for 10 minutes (default), an alarm sounds and "NOT OPERATED FOR A
LONG TIME" is displayed on the LCD screen.
When the steering wheel, throttle trigger, push switch, or edit button are
operated, the alarm is reset. If the system is not to be used, turn off the
power.
The function can be deactivated at the system menu (p.101).
20
Power switch turned on
Model number
Telemetry data
HOME screen shown below appears.
Telemetry function :ON/OFF
Receiver -> Transmitter:
The reception strength is shown.
ST :Steering trim display
TH :Throttle trim display
D/R :Steering D/R display
ATL :Throttle ATL display
Servo operation of each
channel can be checked.