Video Send Mode; To Switch The Video Send Mode; Multi Roi Mode - IAI GO-2401M-PGE User Manual

Video Send Mode

Switch the video send mode to configure and operate Multi ROI, Sequence Trigger, and other JAI
Custom Control functions.
Video Send Mode

■ To switch the video send mode

Select the video send mode in [Video Send Mode Selector].
[Video Send Mode Selector] option
Normal Mode
Multi Mode (Multi ROI)
Trigger Sequence Mode
Command Sequence Mode

■ Multi ROI Mode

In the multi ROI mode, you can specify up to five scanning areas (Index 1 to 5) for a single-frame image.
On the GO-2401-PGE, the areas can overlap, and a separate frame will be output for each area.
Specify the areas by specifying width, height, and horizontal/vertical offset values for each index under
[JAI Custom Control MultiROI].
Normal camera operation.
Multi ROI mode that allows you to configure ROI settings for up to
5 images.
Sequence Trigger mode that executes presets in a predefined order based
on [Sequence Roi Frame Count] and [Sequence Roi Next Index]. Starts at
Index #1.
Sequence Trigger mode that executes the preset listed in [Command
Sequence Index] each time a trigger is received. Can jump to new preset
by sending a new index value to [Command Sequence Index].
Index 4
Offset X
Index 3 Index 3
Offset X
Index 2
Offset X
Index 1 Index 1
Offset X Width
ROI 1
Description
Index 4
Width
Width
Index 2
Width
ROI 2
ROI 4
ROI 3
H-Binning Off
Width Max = 1936
— 37 —
GO-2401M-PGE / GO-2401C-PGE