To Use The Event Control Function; Gain Control - IAI GO-2401M-PGE User Manual

■ To use the event control function

Configure the settings as follows.
Item
Event Selector
Event Notification
Note
[Event Notification] is set to [Off] and event messages will not be output under factory default settings.

Gain Control

[Analog All] can be used for gain control for both the monochrome and color camera. [Analog All]
(master gain) uses the sensor's internal gain function and consists of analog gain + digital gain.
Analog gain is used for lower gain, and analog gain + digital gain is used when the gain becomes
high. R and B can be configured individually as digital gain on the GO-2401C-PGE.
™ For details on how to configure the settings, see "Adjusting the Gain" (page 21).
The relationship between the gain setting value, gain amplification, and dB value is as follows. For
example, a gain amplification of x5.62 will be 15 dB.
Monochrome
Gain
Gain
setting
Gain adjustment range (monochrome)
amplification
value
1600 x16
100 x1
Setting value / selectable range
Acquisition Trigger,
Frame Start,
Frame End,
FVAL Start,
FVAL End,
Exposure Start,
Exposure End,
Line2(Opt Out1) RisingEdge,
Line3(Opt Out2) RisingEdge,
Line5(Opt In1) RisingEdge,
Line2(Opt Out1) FallingEdge,
Line3(Opt Out2) FallingEdge,
Line5(Opt In1) FallingEdge
On
24dB
0dB
— 31 —
GO-2401M-PGE / GO-2401C-PGE
Description
Select the event for which to send notifications.
Output event messages.