Cleaning The Print Head - ZOLL X Series Operator's Manual

Cleaning the Print Head

To clean the recorder print head, perform the following steps:
1. Pull the printer door open (see Fig. 24-1), then remove any paper.
Locate the print head along the front floor of the printer compartment.
2.
3. Gently wipe the print head with a cotton swab moistened with isopropyl alcohol, and dry any
residual alcohol with another dry cotton swab.
Figure 24-3. Cleaning the Print Head
Place the paper back into the unit and close the cover (see Fig. 24-2).
4.
9650-001355-01 Rev. M X Series Operator's Guide
Cleaning instructions
24-9