ZOLL X Series Operator's Manual page 43

Table 2: X Series Controls and Indicators
Control or Indicator
Display screen
Quick access keys
Auxiliary power LED
Battery charge LED
Visual alarm indicators
PACER button
ANALYZE button
ENERGY SELECT
buttons
CHARGE Button
SHOCK Button
NIBP button
Snapshot button
9650-001355-01 Rev.M
Description
Shows therapeutic settings, physiological waveforms and other
information for each monitored parameter, messages, time, and quick
access key labels.
Seven buttons control different functions of the unit. Labels for the
quick access keys appear on the monitor display to the right of each
key.
Illuminated when the unit is plugged in to an auxiliary power adapter.
Indicates battery status.
Steady yellow:
Steady green:
Alternating green and yellow:
No light:
Red, yellow, and green lights located on the top of the unit that flash
on and off when the unit is powered up and are used to indicate a
patient alert, equipment alert, and data transfer.
Displays pacer settings window to start/stop pacing activity or change
the rate, output, or mode settings.
PACER
Displays in Manual mode only. Initiates ECG analysis to determine
whether or not a shockable rhythm is present.
Two sets of up-down arrow buttons control the selection of
defibrillator energy; one set is located on the front panel and the other
set is located on the STERNUM paddle.
Charges the defibrillator to the selected energy. In addition to the
CHARGE button on the front panel, there is one located on the APEX
paddle handle.
The front panel SHOCK
therapy electrodes or internal defibrillation paddles without a
discharge button. The SHOCK button illuminates when the device is
charged and ready.
To discharge the defibrillator when using paddles (internal or
external) with discharge buttons, press and hold the SHOCK buttons
on the paddles.
Starts/stops an NIBP measurement.
Records 24 seconds of numeric and waveform data.
X Series Operator's Guide
Defibrillator Controls and Indicators
Battery is charging.
Battery is charged.
The charge state cannot be
determined or a battery charging
fault has been detected.
Battery is not installed.
button
is only active when using hands-free
2-3