Table of Contents
Advertisement
Chapter 22 Communications
Configuring Enterprise authentication
Further configuration is required for Enterprise; use the navigation keys to select Enterprise
Settings Configure. You will be asked for the Identity, CA certificate (optional for PEAP), and
Authentication Protocol (TLS or PEAP). Some fields will be greyed out, depending on the
Authentication Protocol that you select.
PEAP (Protected Extensible Authentication Protocol): If PEAP (Protected Extensible
Authentication Protocol) is selected, you must enter the Password corresponding to the Identity
entered. If the network requires it, you may enter an Anonymous Identity. The CA certificate is
also optional. Other options on the screen will be greyed out.
Note:
TLS (Transport Layer Security): If TLS is selected, you must select a Client Certificate and
enter the Private Key Password corresponding to the private key in the Certificate file. Other
options on the screen will be greyed out.
For all certificates and keys, you can choose from a list of pre-loaded files.
To load a new certificate from a USB device, select Manage Certificates & Keys. A list of
existing certificates will appear.
Select Load from USB. A list of files on the USB device will appear.
22-20
The X Series unit only supports PEAPv0/v1 + MSCHAPV2.
www.zoll.com
9650-001355-01 Rev. M
Advertisement
Table of Contents
