ZOLL X Series Operator's Manual page 263

Configuring Enterprise Authentication
Further configuration is required for Enterprise; use the navigation keys to select Enterprise
Settings Configure. You will be asked for the Identity, CA certificate (optional for PEAP), and
Authentication Protocol (TLS or PEAP). Some fields will be greyed out, depending on the
Authentication Protocol that you select.
PEAP (Protected Extensible Authentication Protocol): If PEAP (Protected Extensible
Authentication Protocol) is selected, you must enter the Password corresponding to the Identity
entered. If the network requires it, you may enter an Anonymous Identity. The CA certificate is
also optional. Other options on the screen will be greyed out.
Note:
TLS (Transport Layer Security): If TLS is selected, you must select a Client Certificate and
enter the Private Key Password corresponding to the private key in the Certificate file. Other
options on the screen will be greyed out.
For all certificates and keys, you can choose from a list of pre-loaded files. See page 20 below
for information on managing certificates and keys in the Supervisor menu.
Press the back arrow (
When you are done editing the Temporary Profile menu, press the back arrow (
wireless menu.
Note:
9650-001355-01 Rev. M
The X Series unit only supports PEAPv0/v1 + MSCHAPV2.
) to return to editing the Temporary Profile.
The selected Temporary Profile remains selected until a different access point profile is
chosen. You do not need to re-enter the configuration information.
X Series Operator's Guide
The Wireless Menu
) to exit the
22-9