Filenames can only be 24 characters long. If the files on the USB device are more than 24
characters, then they will not appear on the X Series unit screen.
Note:
To load a file, use the arrow keys to select the desired file. Only one file can be selected at a
time.
Select Load Selected. If a new USB device has been inserted, select Refresh List.
Note:
Press
Add Access Point Profile menu.
When finished editing your WiFi profile, press the back arrow (
of configured access point profiles. From this menu you can also edit or delete existing profiles.
After deleting a file, be sure to review the defined Wi-Fi profiles and update any which referred
to the deleted file.
Press
9650-001355-01 Rev. M
The X Series unit only supports PFX format client certificates.
No message will appear to indicate that the file has loaded. After pressing Load
Selected, press the back arrow (
and keys.
to return to the Enterprise Wi-fi Configuration menu, and
to return to the Communications menu.
X Series Operator's Guide
Supervisor Communications Menu
) to view the list of all currently loaded certificates
) to return to return to the list
again to return to the
22-21