Chapter 17 Cleaning and Maintenance
Cleaning the Print Head
To clean the recorder print head (only units equipped with the optional printer), perform the
following steps:
1. Pull the printer door open (see Fig. 2), then remove any paper.
Locate the print head along the front floor of the printer compartment.
2.
Gently wipe the print head with a cotton swab moistened with isopropyl alcohol, and dry any
3.
residual alcohol with another dry cotton swab.
Place the paper back into the unit and close the cover (see Fig. •).
4.
17-4
www.zoll.com
9650-000820-01 Rev. K