Table of Contents
Advertisement
Chapter 2 Product Overview
Attaching the OneStep Cable
When connecting a OneStep electrode to the OneStep cable, push the two connectors together
until the latch clicks, as shown.
When disconnecting the OneStep electrode and OneStep cable, press down the latch with your
thumb as shown.
When attaching the OneStep cables to paddles, attach the OneStep cable from the X Series unit
to the connector at the base of the apex paddle.
OneStep cable connected
to APEX paddle
2-12
Latch
1. Align OneStep cable as shown.
www.zoll.com
Latch
2. Insert OneStep cable into APEX paddle.
9650-001355-01 Rev.M
Advertisement
Table of Contents
