Barco S3 User Manual page 208

6. EM GUI orientation
Diagnostic subtab
Controller tab: Diagnostic subtab
Description of the Devices tab of the Resources area
The Devices tab lists devices, such as projectors, that are connected to the system. Devices such as other processors (E2, S3–4K,
EX, etc.) are Discovered on the Configuration menu Discovered list.
Image 6-89
Devices tab
204
This panel displays test controls for each detected controller.
• LED Test:
- Test Off: LEDs are returned to normal behavior.
- All Blue/Red: Turns on all blue and red LEDs; other
LEDs are turned off.
- All Green: Turns on all green LEDs; other LEDs are
turned off.
• LCD Pixel Test:
- Test Off: LCD text is returned to normal behavior.
- All: All LCD displays are filled (all 256 bits are enabled).
• LCD Backlight Test:
- Test Off: LCD colors are returned to normal behavior.
- Red: Only LCD red color is turned on.
- Green: Only LCD green color is turned on.
- Blue: Only LCD blue color is turned on.
- All: LCD red, green, and blue colors are all turned on.
• Button Test:
- Checkbox checked: The test is on.
When the test is on, do not trigger the behavior of the
button. For example, if a button is mapped to a Preset,
do not recall that Preset.
- Button Scan Code: Pressing a button on the controller
shows the button number returned by the API (in place
of the "NA").
• T-Bar Test:
- Checkbox checked: The test is on.
- T-Bar Value: Moving the T-Bar shows the number
returned by the API as the T-Bar changes positions.
• Adjustment Wheel Test:
- Checkbox checked: The test is on.
- When the test is on, rotating the wheel shows the
number returned by the API.
R5905948 EVENT MASTER DEVICES 17/07/2017